Lila AzureFilm PETG 1.75 mm 1 kg

AzureFilm PETG (polyethylene terephthalate) filament is a filament that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and PLA filament (easy to print). Because of these properties, PETG is a filament material for 3D printing that you must have. It is environmentally friendly and can be recycled after use. 

The filament is vacuum-sealed and contains a silica bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PETG filament is 1.75 mm and is produced in more than 10 different shades.

Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines.

AzureFilm PETG filament is extremely durable, solid and odourless. It is an excellent filament that combines strength and flexibility, so it is used for printing mechanical products or in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

For good results, you must print at a temperature of 220-230°C, and the heated bed should be heated to 80-90°C. Please note that the temperature range of the print media may differ slightly between printers.

Filament made of PETG material easily adheres to the heated bed so it can be printed on acrylic, glass or polyamide tape. 

The advantage of PETG filament is that you do not need a sealed chamber for printing, and the print speed is comparable to that of PLA filament. 

The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently the products are structurally strong and resistant to mechanical influences.