Welcome to newsletter number 9 from filament.nu

Previous newsletters can be found here: https://filament.nu/gb/content/category/3-newsletters


3DKordo PLApro

Exciting new filament from 3DKordo, which on almost all parameters is more sturdy than regular PLA: impact resistance, heat resistance are just two things that are on par with ABS. It is printed at a slightly higher hot end temperature than PLA: 220-230 ° C.

Find 3DKordo PLApro found here: https://filament.nu/gb/82-everfil-plapro

AzureFilm PETG

We now also carry PETG from AzureFilm. It is good quality filament, with a diameter tolerance of 0.02 mm. It is printed at a hotbed temperature of 220-230 ° C and a heatbed temperature of 80-90 ° C. The price is good, and if you take advantage of our 10% volume discount, you can get AzureFilm PETG for 135 DKK pr. kg. The filament is available on spools in the sizes 1 kg and 2.1 kg.

Find AzureFilm PETG here: https://filament.nu/gb/81-petg


This time we have added two vases you can print. Use them for flowers, pencils or maybe an LED tealight. Regardless, it is recommended to scale them by 150-250% as the models are a bit small in it.


Vase with rounded pegs.

See and download the model here: https://filament.nu/gb/content/32-roundy


Vase with some squareness

See and download the model here: https://filament.nu/gb/content/33-stubby

Find all the models here: https://filament.nu/gb/content/category/9-models

Mistery Box

40 models from Ferjerez that have not been released before. Ferjerez is known for amongst other things making procedurally generated models, and there are many exciting ones in between.

Find the Mistery Box here: https://www.thingiverse.com/thing:4656391

Links and guides

PrusaSlicer paint-on supports

Paint on your custom supports in the new version 2.3 of PrusaSlicer.

See the video here: https://www.youtube.com/watch?v=XFUfRVAm9ts

Melt your prints stronger with salt

Make your prints stronger by packing them in salt and remelting them.

CNC Kitchen shows you how here: https://www.youtube.com/watch?v=DyAKtS1b3SQ

Lars Christensen

If you want to get started with Fusion 360 for modelling, Lars Christensen will give you a good start. He is from Denmark and works at Autodesk.

Find Lars' channel here: https://www.youtube.com/channel/UCo29kn3d9ziFUZGZ50VKvWA

Black Friday/Cyber Monday

We always have fixed low prices, as well as the opportunity for good volume discounts across our entire range. Of course, this also applies to both Black Friday and Cyber Monday.

- Buy a combination of 3 rolls of filament or bottles of resin and get 5% discount.

- Buy a combination of 6+ rolls of filament or bottles of resin and get 10% discount.

See our entire selection of filament: https://filament.nu/da/71-filament

See our entire selection of resin: https://filament.nu/da/69-resin

Follow us on

Twitter: https://twitter.com/filamentnu

Google: https://g.page/filament-nu

Rate us on

Trustpilot: https://en.trustpilot.com/review/filament.nu

Google: https://g.page/filament-nu/review

Thanks for the orders and keep printing.


 Flemming / filament.nu