• New
Example of black AzureFilm PAHT/CF filament.
  • Example of black AzureFilm PAHT/CF filament.
  • Example of black AzureFilm PAHT/CF filament.
  • Example of black AzureFilm PAHT/CF filament.
  • Example of black AzureFilm PAHT/CF filament.

Black AzureFilm PAHT/CF 1.75 mm 500 g

DKK296.00

Shipping from 39 DKK Free shipping on purchases above 699 DKK


 Buy 3 rolls of filament/bottles of resin and get a 5% discount. 

 Buy 6+ rolls of filament/bottles of resin and get a 10% discount. 

Can be combined across our entire product range.

Delivered in 2-4 days

Made in EU, high quality raw materials.
High z-layer strength, temperature resistance up to 160 °C.
500 g of filament on a spool.

Quantity
Last items in stock

AzureFilm PAHT Carbon Fiber is a nylon filament with carbon fiber that is easy to print with. This filament has excellent mechanical properties without warping including high z-layer strength, temperature resistance up to 160 °C (max. 200 hours) and a continuous operating temperature of 120 °C.

AzureFilm PAHT/CF takes approx. 4 times longer to reach the saturation point of water uptake compared to unmodified PA6, and it has a saturation point 5 times lower than conventional PA6 materials.

The filament is vacuum sealed and contains a silica bag that absorbs moisture and allows the filament to stay fresh.

AzureFilm PAHT/CF filament is extremely durable, solid and odorless. It is an excellent filament that combines strength and flexibility so that it can be used for printing mechanical products or in robotics. Because it shrinks and warps minimally, it is ideal for printing large items. It is a material that is characterized by a glossy finish and therefore it is also used for printing decorative elements.

For good results, print at a temperature of 265-290 ° C and heat the circuit board to 90-120 ° C. Note that the temperature range of the print media may vary depending on the printer used.

The fibers have a size of 0.4-0.6 mm, which is why we recommend that you at least print with a hardened nozzle of 0.6 mm.

The advantage of PAHT filament is that you do not need a sealed chamber when printing, and the print speed is comparable to that of PLA filament.

FN171-CABK
2 Items

Data sheet

Diameter tolerance
+/- 0.02 mm
Weight (filament)
500 g
Diameter
1,75mm
Colour
Black
Hotend
265-290 ˚C
Heated bed
90-120 ˚C
Material
PA (Nylon)